AWR201
Compact 1-Wire RFID Card Reader
- Standard 1-Wire interface
- 13.56 MHz and 125 kHz
- Built-in LED and buzzer
- 7–32 V DC
- MIFARE and ISO14443A/B support
- 41 × 41 × 11 mm
A compact 1-Wire RFID reader for secure driver identification. Ensures only authorized drivers gain access, enhancing fleet safety and operational security with built-in LED indicator and buzzer output.
More about AWR201 in our documentation
General Specification
| 4 pin 1-wire interface | Power support, Ground, 1-Wire data, Buzzer output |
|---|---|
| Built-in LED indicator | |
| Dimension | 41x41x11 mm |
| Weight | 68g |
| Cable length | 1 Meter |
| Operating voltage | 7V ~ 32V DC |
| Operation Temperature | -20℃ ~ + 80℃ |
| Storage Temperature | -20℃ ~ + 85℃ |
| Frequency | 13.56MHz | 125KHz |
Supported Cards
| 125 KHz | EM4100 XSF Card HID Prox |
|---|---|
| 13.56 MHz | Mifare Classic Mifare Classic EV1 Mifare DESFire EV1/EV2/EV3 NTAG 215 ISO/IEC 15693 cards ISO/IEC 14443-B cards |
Regulatory approvals and conformity certificates of the AWR201. Each one opens its page in our documentation.
CE RED (MiCOM)
EU-Type Examination certificate LIXU01_EU (Rev A) under the Radio Equipment Directive 2014/53/EU (Annex III, Module B), covering Articles 3.1(a), 3.1(b) and 3.2. Issued on 30 September 2025 by MiCOM Labs Inc. (notified body NB 2280) for the AWR201 1-Wire RFID reader (hardware V1.01, firmware A01V04).
View certificate — CE RED (MiCOM) (opens in a new tab)
